Showing 209–224 of 241 results

• 

  Miter Cutter (3104)

  This tool makes fast, accurate angled and straight cuts in wood quarter round, plastic tile trim, rubber and more. Has a razor sharp replaceable steel blade with non-stick coating for increased cutting performance and rust prevention. Tool has comfortable nonslip grips, nickel plated steel construction and the handle locks in the closed position for safety. The aluminum anvil is marked at 45°, 60°, 75° and 90° for inside/outside cuts. Length of cut is approximately 2″ and overall length is 8-1/2″.

  $46.95 Add to Cart
• 

  Carbide Tipped Steel Blade (788)

  For use with the older version No. 795 Toe-Kick Saw only. This Carbide Tipped blade has 16 teeth and is 2-3/4″ in diameter. Depth of cut is 3/8″

  Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for cutting metal as sparks can cause a fire hazard.

  $20.75 Add to Cart
• 

  Carbide Tipped Steel Blade (821)

  This 6-1/2″ diameter blade is for undercutting wood. Carbide tipped for long life. Use with No. 812 Super Saw or No. 820 Heavy Duty Undercut Saw.

  Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for cutting metal as sparks can cause a fire hazard.

  $28.35 Add to Cart
• 

  Continuous Diamond Rim Blade (789)

  This Segmented Diamond Rim blade is 2-7/8″ in diameter and has a 1/2″ depth of cut. This blade is compatible with all versions of the Crain Toe-Kick Saw..

  Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for cutting metal as sparks can cause a fire hazard.

  $21.99 Add to Cart
• 

  Carbide Tipped Steel Blade (787)

  This Carbide Tipped blade has 18 teeth and is 3-3/8″ in diameter. Depth of cut is 3/4″. This blade is compatible with all versions of the Crain Toe-Kick Saw (No. 775 and the discontinued Nos. 785 and 795).

  Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for cutting metal as sparks can cause a fire hazard.

  $20.75 Add to Cart
• 

  Toe-Kick Saw Kit (775)

  This Toe-Kick Saw cuts flush to the inner wall of a toe space in a cabinet or counter area to remove old underlayment. The saw has a clutch mechanism that may disengage to reduce kickback forces if the saw is abused by cutting curves or cutting backwards. The No. 789 Diamond Blade is sold separately and can be used on this saw for cutting tile or grout. Each saw kit includes a No. 787 Carbide Tipped Steel Blade, saw, plastic carrying case, hex wrench and instructions.

  Note: The No. 788 Carbide Tipped Steel Blade is NOT for use with this saw.

  $360.52 Add to Cart
• 

  Carbide Tipped Steel Blade (556)

  This 36-tooth 5-5/8″ diameter Carbide Tipped Steel Blade is bell shaped for flush cutting wood and added rigidity. For use with the Nos. 555 and 545 Multi-Undercut Saw.

  Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for cutting metal as sparks can cause a fire hazard.

  $26.22 Add to Cart
• 

  Multi-Undercut Saw Kit (575)

  Light duty saw replaces the No. 545

  This saw undercuts walls, door jambs, toe spaces and will also fully undercut inside corners up to 1/4″ deep. The height of cut is easily adjustable from flush to 1″ above the floor in 3/32″ increments. The large flat base helps prevent tipping and assures accurate, level cutting. Has a dual angle depth gauge which allows undercutting at a ‘straight on’ or 45° angle. An adjustment scale provides precision depth control in 1/8″ increments. Maximum depth of cut is 1-1/4″. Saw has a 7′ 18/2 cord and is double insulated for safety. Each Saw Kit includes a No. 556 Carbide Tipped Steel Blade, saw, plastic carrying case, hex wrench for blade removal and instructions. Guaranteed for six months, not including the motor or motor brushes.

  $299.64 Add to Cart
• 

  Segmented Diamond Blade (822)

  This 6-1/2″ diameter blade is for dry undercutting tile, stone, concrete and brick. Use with Nos. 812 Super Cut Saw, No. 820 Heavy Duty Undercut Saw or the No. 825 Heavy Duty Undercut Saw .

  Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for cutting metal as sparks can cause a fire hazard.

  $50.49 Add to Cart
• 

  Carbide Tipped Steel Blade (836)

  This new 6-1/2″ diameter blade is for undercutting wood and provides improved flatness and greater cutting efficiency. Has 40 each Carbide Tipped Teeth for long life. For use only with No. 835 Heavy Duty Undercut Saw.

  Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for cutting metal as sparks can cause a fire hazard.

  $28.35 Add to Cart
• 

  Masonry Blade (805)

  This 6-1/2″ diameter blade is for dry undercutting masonry. Use with the No. 820 Heavy Duty Undercut Saw and the No. 812 Super Saw or the Discontinued Nos. 800, 800V, 810, and 810V Super Saws.

  Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for cutting metal as sparks can cause a fire hazard.

  $15.31 Add to Cart
• 

  Heavy Duty Undercut Saw Kit (835)

  Replaces the No. 825 Saw with 60% more power

  This powerful saw undercuts walls, door jambs, doors, inside corners and most toe spaces. The 61/2″ diameter No. 836 Carbide Tipped Steel Blade can fully undercut most doors in place and when used with the No. 805 Masonry Blade, can also be used for undercutting hearths. Height of cut is easily adjustable from flush to 1″ above the floor with 3/32″ graduations. The large height adjuster base helps prevent tipping and assures accurate, level cutting. Has a dual angle depth gauge which allows undercutting at a ‘straight on’ or 45° angle. Depth gauge is graduated in 1/8″ increments with a 15/8″ maximum depth of cut. Saw has a 7′ 14/2 cord and is double insulated for safety. Each Saw Kit includes Nos. 805 Masonry Blade, 836 Carbide Tipped Steel Blade, Nos. 1812-O Blade Spacer and 1835-13 Blade Driver (needed for use with the Nos. 805 Masonry Blade and optional 822 Diamond Blade), saw, plastic carrying case, hex wrench for blade removal and instructions. Guaranteed for one year.

  $363.87 Add to Cart
• 

  1/8″ (3mm) Dual Flow Nozzle (NC-361PB)

  This steel nozzle has two 1/8″ openings for increased adhesive output. Great for use with wide/architectural tack strip, hardwood start/finish rows and more. Has an internal spring loaded ball-check valve for precise flow of adhesive without drips. Can be used with other glue guns with 7/16″ – 20 internal threads.

  $25.65 Add to Cart
• 

  1/8″ (3mm) Pro Repair Nozzle (SPN-28)

  This steel nozzle has a sharpened 1-1/8″ long point designed for piercing carpet backing for carpet bubble repair. Can also be used for hardwood hollow spot repair. Has an internal spring loaded ball-check valve for precise flow of adhesive without drips and a silicone cover to protect users from burns when changing tips. Can be used with other glue guns with 7/16″ – 20 internal threads.

  $24.95 Add to Cart
• 

  5/32″ (4mm) FLEX Replacement Nozzle (67022-P)

  This conical shaped steel nozzle is included with each No. HB-220 Pro Adhesive Applicator for general use. Has an internal spring loaded ball-check valve for precise flow of adhesive without drips and a silicone cover to protect users from burns when changing tips. Can be used with other glue guns with 7/16″ – 20 internal threads.

  $15.95 Add to Cart
• 

  10″ FLEX-180 Adhesive (18/Pkg.)

  FLEX is ideal for the floor installer looking for an adhesive system that provides strength, versatility and speed. It combines the strength of construction adhesive with the speed and flexibility of hot melt. FLEX works in a variety of applications…

  $17.20 Add to Cart