Always fair prices and quality products

Cart 0
Get Professional Service252-499-4010
Cart 0

Shop

HomeShop

Shop

Showing 193–208 of 241 results

  • Short Big Scraper with Vinyl Hand Grip (375S)

    Scrape faster and with less work because you can always have a razor sharp blade! Length on both models is adjustable for maximum comfort—kneeling or standing. Adjustment is quick and easy! Not recommended for heavy duty prying floor removal work. Each scraper has a comfortable vinyl grip and four case hardened screws to resist slot wear and give maximum blade holding power. Supplied with one blade, installed backwards for safety. Replacement blades are available.

    8″ Replaceable Blade Scrapers – adjustable from 19″ to “26″

    $45.50 Add to Cart

  • 4″ Scraper Blades – 100/box (695-C)

    4″ x .017″ Replacement Blades

    Replacement blades for the Nos. 690, 790, & 990 scrapers

    $24.50 Add to Cart

  • 4″ Replaceable Blade Scraper – 18″ Long (790)

    These heavy duty scrapers are widely used for a variety of scraping jobs and are especially useful for removing sponge carpet backing. The angled blade holding heads, plus the razor sharp blades, provide ‘clean shaving’ cutting action. Each scraper has a comfortable vinyl grip and three case hardened screws to resist slot wear and give maximum blade holding power.

    The No. 690 is the standard 12″ long scraper, the No. 790 is the 18″ long scraper for tougher jobs and the No. 990 is the 48″ long stand-up scraper. Supplied with one blade, installed backwards for safety. Replacement blades are available.

    $16.50 Add to Cart

  • 4″ Replaceable Blade Scraper – 12″ long (690)

    These heavy duty scrapers are widely used for a variety of scraping jobs and are especially useful for removing sponge carpet backing. The angled blade holding heads, plus the razor sharp blades, provide ‘clean shaving’ cutting action. Each scraper has a comfortable vinyl grip and three case hardened screws to resist slot wear and give maximum blade holding power.

    The No. 690 is the standard 12″ long scraper, the No. 790 is the 18″ long scraper for tougher jobs and the No. 990 is the 48″ long stand-up scraper. Supplied with one blade, installed backwards for safety. Replacement blades are available.

    $12.59 Add to Cart

  • Moulding Lifter (57-ML)

    This tool gives positive leverage control to avoid denting the baseboard. It is also specially designed to lift the moulding at approximately the same angle that the nails were driven. The smoothly ground slim ends enter easily under the mouldings, and both are notched for nail and brad pulling. The top grade tool steel is hardened and tempered for maximum toughness. Finished with a rust proof bright nickel plating. Weighs 1/2 lb. and is 10-1/2″ long.

    $13.45 Add to Cart

  • Black Rubber Mallet (350-2B)

    Used by carpet installers and ceramic tile setters. This top quality mallet provides longer service than lower cost, lesser quality models. Has a sturdy hardwood handle and economic black head.

    $16.75 Add to Cart

  • White Rubber Mallet (350-2W)

    Used by carpet installers and ceramic tile setters. This top quality mallet provides longer service than lower cost, lesser quality models. Has a sturdy hardwood handle and non-marking white head.

    $19.20 Add to Cart

  • 75″ Long Aluminum Straight Edge (ASE-75)

    For use with carpet, the corrugated back prevents creeping of the straight edge and allows sliding in a straight line direction. Made from hardened aircraft aluminum alloy with a clear anodized finish, these straight edges are lightweight. One end has a 45° miter, and a nail hole is provided in the other end. Both are 2-1/2″ wide x 1/8″ thick and are economically priced.

    $34.50 Add to Cart

  • 48″ Long Aluminum Straight Edge (ASE-48)

    For use with carpet, the corrugated back prevents creeping of the straight edge and allows sliding in a straight line direction. Made from hardened aircraft aluminum alloy with a clear anodized finish, these straight edges are lightweight. One end has a 45° miter, and a nail hole is provided in the other end. Both are 2-1/2″ wide x 1/8″ thick and are economically priced.

    $24.50 Add to Cart

  • 35″ Long Aluminum Straight Edge (ASE-35)

    For use with carpet, the corrugated back prevents creeping of the straight edge and allows sliding in a straight line direction. Made from hardened aircraft aluminum alloy with a clear anodized finish, these straight edges are lightweight. One end has a 45° miter, and a nail hole is provided in the other end. Both are 2-1/2″ wide x 1/8″ thick and are economically priced.

    For use in 36″ wide doorways common in commercial construction

    $19.50 Add to Cart

  • 75″ Long Combination Edge (119)

    Improve the quality of your tufted carpet seams with a ‘serpent edge’ seam that will not peak. This wavy design prevents ‘hinging action’, because the carpet edges crisscross the center line of the tape. Also, serpent seams are stronger because there is more length of seam on the same amount of tape—compared to a straight seam. The curves are gentle and easy to follow with a knife. The straight side is provided for resilient work. Made from 1/8″ thick rust resistant galvanized steel. Supplied with nonskid backing on one side. Both sides are precision ground, and easy-to-follow instructions are supplied with each tool.
    $114.52 Add to Cart

  • 36″ Long Combination Edge (119S)

    Improve the quality of your tufted carpet seams with a ‘serpent edge’ seam that will not peak. This wavy design prevents ‘hinging action’, because the carpet edges crisscross the center line of the tape. Also, serpent seams are stronger because there is more length of seam on the same amount of tape—compared to a straight seam. The curves are gentle and easy to follow with a knife. The straight side is provided for resilient work. Made from 1/8″ thick rust resistant galvanized steel. Supplied with nonskid backing on one side. Both sides are precision ground, and easy-to-follow instructions are supplied with each tool.

    $102.70 Add to Cart

  • 48″ Adjustable Aluminum T-Square (317-48-A)

    This heavy duty T-square has an offset head that is adjustable from the end to the midpoint of the long leg, held in place by a large knob screw. The head is grooved so that the 90° angle is maintained at any point of the adjustment. The head can also be positioned (out of the 90° groove) to any angle including etched marks for 30°, 45°, 60° and 75° angles. The T-square can also be used without the head as a straight edge and folded into a straight position for easy storage. The head extends 4-1/2″ on one side of the long leg and 12-1/2″ on the other side and is 5/8″ thick with a dual scale, one with 1/16″ graduations and the other with 1/8″ graduations. Each end of the head has a removable plastic end cap that is flanged to prevent flipping. The long leg is 2″ wide x 48″ long x 1/4″ thick with the scale from the head end reading in 1/8″ graduations and from the other end reading in 1/16″ graduations. The T-square has a clear anodized finish.

    $31.50 Add to Cart

  • 48″ Aluminum T-Square (316-48-T)

    This T-square has an offset head 1-1/2″ wide x 24″ long x 3/8″ thick with 1/8″ graduations. It extends 6″ on one side of the long leg, and 16″ on the other side. Four rivets assure permanent accuracy for the lifetime of the tool. The long leg is 2″ wide x 48″ long x 1/8″ thick with 1/16″ graduations. Numerals read from both ends and has a clear anodized finish.

    $18.50 Add to Cart

  • Replacement Blade for No. 855 (856)

    Replacement blade for No. 855

    $11.10 Add to Cart

  • Miter Cutter Replacement Blade (3104-RB)

    Replacement blade for No. 3104 with a non-stick coating for increased cutting performance and rust prevention.

    $15.75 Add to Cart
Minimum 4 characters