Always fair prices and quality products
Showing 33–40 of 42 results
This Segmented Diamond Rim blade is 2-7/8″ in diameter and has a 1/2″ depth of cut. This blade is compatible with all versions of the Crain Toe-Kick Saw..
Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for cutting metal as sparks can cause a fire hazard.
This Carbide Tipped blade has 18 teeth and is 3-3/8″ in diameter. Depth of cut is 3/4″. This blade is compatible with all versions of the Crain Toe-Kick Saw (No. 775 and the discontinued Nos. 785 and 795).
Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for cutting metal as sparks can cause a fire hazard.
This Toe-Kick Saw cuts flush to the inner wall of a toe space in a cabinet or counter area to remove old underlayment. The saw has a clutch mechanism that may disengage to reduce kickback forces if the saw is abused by cutting curves or cutting backwards. The No. 789 Diamond Blade is sold separately and can be used on this saw for cutting tile or grout. Each saw kit includes a No. 787 Carbide Tipped Steel Blade, saw, plastic carrying case, hex wrench and instructions.
Note: The No. 788 Carbide Tipped Steel Blade is NOT for use with this saw.
This 36-tooth 5-5/8″ diameter Carbide Tipped Steel Blade is bell shaped for flush cutting wood and added rigidity. For use with the Nos. 555 and 545 Multi-Undercut Saw.
Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for cutting metal as sparks can cause a fire hazard.
Light duty saw replaces the No. 545
This saw undercuts walls, door jambs, toe spaces and will also fully undercut inside corners up to 1/4″ deep. The height of cut is easily adjustable from flush to 1″ above the floor in 3/32″ increments. The large flat base helps prevent tipping and assures accurate, level cutting. Has a dual angle depth gauge which allows undercutting at a ‘straight on’ or 45° angle. An adjustment scale provides precision depth control in 1/8″ increments. Maximum depth of cut is 1-1/4″. Saw has a 7′ 18/2 cord and is double insulated for safety. Each Saw Kit includes a No. 556 Carbide Tipped Steel Blade, saw, plastic carrying case, hex wrench for blade removal and instructions. Guaranteed for six months, not including the motor or motor brushes.
This 6-1/2″ diameter blade is for dry undercutting tile, stone, concrete and brick. Use with Nos. 812 Super Cut Saw, No. 820 Heavy Duty Undercut Saw or the No. 825 Heavy Duty Undercut Saw .
Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for cutting metal as sparks can cause a fire hazard.
This new 6-1/2″ diameter blade is for undercutting wood and provides improved flatness and greater cutting efficiency. Has 40 each Carbide Tipped Teeth for long life. For use only with No. 835 Heavy Duty Undercut Saw.
Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for cutting metal as sparks can cause a fire hazard.
This 6-1/2″ diameter blade is for dry undercutting masonry. Use with the No. 820 Heavy Duty Undercut Saw and the No. 812 Super Saw or the Discontinued Nos. 800, 800V, 810, and 810V Super Saws.
Caution: As these blades are subject to possible abuse, they are not guaranteed. Blades are not recommended for cutting metal as sparks can cause a fire hazard.