Always fair prices and quality products
Showing 9–16 of 17 results
Continuous Rim Diamond Tile Blades. These top quality blades are designed to give clean, smooth, chip free cuts on floor tile, ceramic tile, granite, marble, brick and other natural stone. All blades have a 7 mm (.276″) diamond rim height. Wet – For use only with water!
This patented clear plastic drainage disk is for placement around a drain opening in a shower floor. Designed to be positioned between the floor pan and the mortar laid over the floor pan. The ridges of the Positive Weep Hole Protector allow for drainage of water to the weep holes in the drain receptor. Helps prevent water from sitting between the shower pan liner and mortar bed. The inner and outer diameter of the disk are perforated to allow for customization depending on shower drain size.
Pre-Pitch™ is a unique, stay in place screeding tool designed for use underneath shower pan liners. The first product to be installed, Pre-Pitch creates the proper sub floor pitch (1/4″ per 12″ run) needed to direct water flow towards the weep holes that are an integral part of shower floor drains. By having a pitch under the pan liner, water that passes through the mud bed is now directed to the weep holes instead of being trapped between the mud bed and the liner where many mold and mildew related issues originate. The Pre-Pitch sticks have holes in their vertical web which helps to act as reinforcement and are easily cut with a hacksaw, PVC cutter or dry diamond blade. For wood subfloors, Pre-Pitch can be screwed or nailed in place. For concrete subfloors, use two sided tape. Subfloor must be level, sound and properly prepared prior to installing Pre-Pitch.
These extended sticks attach to the 7/8″ end of the Standard Pre-Pitch Sticks. They are for use in shower areas where the walls are more than 36″ (but less than 72″) from the floor drain. Sticks measure 7/8″ to 1-5/8″ taper x 36″ long. Sold 4 per package.
Pre-Pitch™ is a unique, stay in place screeding tool designed for use underneath shower pan liners. The first product to be installed, Pre-Pitch creates the proper sub floor pitch (1/4″ per 12″ run) needed to direct water flow towards the weep holes that are an integral part of shower floor drains. By having a pitch under the pan liner, water that passes through the mud bed is now directed to the weep holes instead of being trapped between the mud bed and the liner where many mold and mildew related issues originate. The Pre-Pitch sticks have holes in their vertical web which helps to act as reinforcement and are easily cut with a hacksaw, PVC cutter or dry diamond blade. For wood subfloors, Pre-Pitch can be screwed or nailed in place. For concrete subfloors, use two sided tape. Subfloor must be level, sound and properly prepared prior to installing Pre-Pitch. Includes instructions, screws, and double sided tape.
For standard shower areas with a centered drain or custom shower areas where the drain is within 36″ of each wall. For shower areas where the walls are more than 36″ (but less than 72″) from the floor drain, also use Pre-Pitch Extended Kit. Sticks measure 1/8″ to 7/8″ taper x 36″ long. Sold 6 per package.
The Kirb-Perfect Shower Curb is a stay-in-place plastic form for building perfect shower curbs. Kirb-Perfect is designed to be used with a pan liner. It can be used with or without a 2 x 4 wood curb. With molded in dovetail connecting lugs, this curb can be used for multiple length installations. Each piece of the Kirb-Perfect Shower Curb is easily cut with a hacksaw, PVC cutters or angle grinder. Supplied with two (1-1/4″ long) and eight (3/4″ long) stainless steel self tapping screws and illustrated installation instructions. Kirb-Perfect is 4-9/16″ wide x 30″ long and 5-1/2″ high.
Quick Pitch® Standard Float Sticks / Quick Pitch® Float System
These are the Standard Float Sticks (1″ to 1-3/4″ taper x 36″ long) that are supplied in the No. QPK-101 Quick Pitch® Standard Kit, and they attach directly to the Center Ring. These ‘extras’ are generally needed for use in custom shower areas with either curved, or more than four, walls. Sold 9 each per package.
Quick Pitch® Extended Float Sticks (8/pkg)
These Extended Float Sticks (1-3/4″ to 2-1/2″ taper x 36″ long) attach to the 1-3/4″ end of the Standard Float Sticks. They are for use in shower areas where the walls are more than 36″ (but less than 72″) from the floor drain. Sold 8 each per package.
Quick Pitch® Float System
For standard 36″ x 60″ shower areas with a centered drain, or custom shower areas where the drain is within 36″ of each wall. Included in each package is one each Center Ring and 6 each Standard Float Sticks (1″ to 1-3/4″ taper x 36″ long) that attach in any of the 24 slots on the Center Ring.